View DRT-480-24_5024670.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

480W Three Phase Industrial DIN RAIL Power Supply
Features :
D R T- 4 8 0
series
Three-Phase AC 340 ~ 550V wide range input High efficiency 89% and low dissipation Protections:Short circuit/Over load/Over voltage/Over temperature Cooling by free air convection Built-in constant current limiting circuit Can be installed on DIN rail TS-35/7.5 or 15 UL 508(industrial control equipment)approved EN61000-6-2(EN50082-2) industrial immunity level 100% full load burn-in test 3 years warranty
R
SPECIFICATION
MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER OUTPUT VOLTAGE ADJ. RANGE DRT-480-24 24V 20A 0 ~ 20A 480W DRT-480-48 48V 10A 0 ~ 10A 480W 80mVp-p 48 ~ 55V 1.0% 0.5% 0.5% 800ms, 40ms/500VAC at full load 480 ~ 780VDC 90% 35ms/500VAC at full load
RIPPLE & NOISE (max.) Note.2 80mVp-p 24 ~ 28V VOLTAGE TOLERANCE Note.3 1.0% LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER LOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 0.5% 0.5% 1200ms, 40ms/400VAC 16ms/400VAC 47 ~ 63Hz 89% 1.7A/400VAC 1.3A/500VAC COLD START 50A <3.5mA / 530VAC Three-Phase 340 ~ 550VAC
105 ~ 150% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 30 ~ 36V 59 ~ 66V Protection type : Shut down o/p voltage, re-power on to recover 110 5 (TSW) Detect on heatsink of power switch Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +70 -40 ~ +85 0.03%/ (Refer to output load derating curve) , 10 ~ 95% RH (0 ~ 50 20 ~ 90% RH non-condensing
Component:10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes; Mounting: Compliance to IEC60068-2-6 UL508, UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC SAFETY & ISOLATION RESISTANCE EMI CONDUCTION & RADIATION Compliance to EN55011 (CISPR11), EN55022 (CISPR22), EN61204-3 Class B EMC
(Note 4)
HARMONIC CURRENT EMS IMMUNITY MTBF
Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, ENV50204, EN61204-3, EN61000-6-2 (EN50082-2) Heavy industry level, criteria A 91.1Khrs min. MIL-HDBK-217F (25 227*125.2*100mm (W*H*D) 2.5Kg; 6pcs/16Kg/1.75CUFT )
OTHERS
NOTE
DIMENSION PACKING
1. All parameters NOT specially mentioned are measured at 400VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Dual phase operation: derating of 20% is required.
File Name:DRT-480-SPEC 2005-09-06
480W Three Phase Industrial DIN RAIL Power Supply
Mechanical Specification
D R T- 4 8 0
Case No.930A
series
Unit:mm
100
227
TB1 4321
LED
TB2 4321
+V ADJ.
35 Admissible Din Rail: TS35/7.5 or TS35/15
TB1 Terminal Pin. No Assignment
Pin No. 1 2 3 4 Assignment AC/L1 AC/L2 AC/L3 FG
TB2 Terminal Pin. No Assignment
Pin No. 1,2 3,4 Assignment DC OUTPUT +V DC OUTPUT -V
Derating Curve
Static Characteristics
100
100 90 85 80 70
Three phase operation
80
60
Dual phase operation
LOAD (%)
LOAD (%)
40
60 50 40
20
-20
0
10
20
30
40
50
60
70 (VERTICAL)
340
355
370
385
400
415 430
125.2
460 475
490
505 520 550
AMBIENT TEMPERATURE ( )
INPUT VOLTAGE (VAC) 60Hz
File Name:DRT-480-SPEC 2005-09-06

▲Up To Search▲

Price & Availability of DRT-480-24

	To Download DRT-480-24 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .